RANGER 8
Delivery in disassembled state, packaging - 4 places:
• place 1 of 4 (part of the body)
1815x685x165, gross 57.7 kg;
• place 2 of 4 (part of the body)
1785x685x155 mm, gross 59 kg;
• place 3 of 4 (heating unit)
615x615x220 mm, gross 18.9 kg
• place 4 of 4 (set of pipes)
1785x685x155 mm, gross 59 kg;
Drying cabinets for clothes and shoes of RANGER-8 are designed for drying wet clothes and shoes, pre-wringing is not required.
The cabinet is a metal body with a frame structure. The body is divided in width into a section for drying clothes with two doors that can be closed with a bolt lock, and a section for drying shoes that can also be closed with a bolt lock. At the back of the shoe section there is a built-in heating unit that pumps warm air into both the clothing section and the shoe section.
There are holes for air outlet in each section of the cabinet cover. Flanges for connection to an external ventilation system are included.
The heating unit is a welded structure made of sheet steel. The heating unit consists of: two cross fans, two needle mica heaters, two temperature control sensors and two electronic control units. Control buttons, digital and light indication of operating modes are located on the front surface at the top of the cabinet. As a protection against overheating, hot-melt fuses are used (without return to the initial point).
Technical characteristics of RANGER-8 models
|
RANGER-8 |
||
| Overall dimensions (height, width, depth) |
1770×1800×658 *mm |
|
| Number of removable meshy shelves in set |
1 pc. |
|
| Maximum shelf load |
10 kg |
|
| The number of crossbars in set of hangers |
1 pc. |
|
| Maximum load on the crossbar for hangers |
20 kg |
|
| Number of crossbars for hanging body armor |
— |
|
| Maximum load on the crossbar for kneading body armours | ||
| Number of removable pipes for hanging shoes |
16 pcs. |
|
| The maximum load for a removable pipe for hanging shoes |
3 kg |
|
| The number in the set of flanges of the air outlet in the outer hood |
2 pcs. |
|
| Diameter of the flange for air removal to the external hood |
120 or 125 mm |
|
| The length of the power cord |
2.5 m |
|
| Cabinet grounding |
through the ground wire and the ground contact in the plug of the power cord. |
|
| Supply voltage |
230V/50Hz |
|
| Number of cross fans |
2 pcs. |
|
| Power capacity of a cross fan |
Section for clothes |
300 m3/h |
|
Section for shoes |
||
| The power of the motor cross fan |
Section for clothes |
53 W |
|
Section for shoes |
53 W |
|
| Type of heating element |
needle mica |
|
| Number of heating units |
2 pcs. |
|
| The power of the heating element |
Section for clothes |
2000 W |
|
Section for shoes |
1000 W |
|
| Mode of operation |
Section for clothes |
|
|
Section for shoes |
|
|
| Timer with fixed automatic shutdown setting |
Section for clothes |
|
|
Section for shoes |
|
|
| Overheating protection |
Section for clothes |
hot melt fuse (no return to initial point) |
|
Section for shoes |
||
| Net weight |
134.7 kg |
|
* without air outlet flange
