Delivery in disassembled state, packaging - 2 places:
• place 1 of 2 (upper part of the body)
2010x550x140, gross 57.5 kg;
• place 2 of 2 (stand)
670x550x160 mm, gross 9.8 kg
Drying cabinets of Universal-2000 models are designed for drying wet clothes and shoes, pre-wringing is not required.
Structurally, the cabinet consists of two basic elements: the upper part of the cabinet body and the lower stand with a built-in heating unit. The upper part of the body is connected to the stand by means of standard hardware.
The upper part of the body is separated by a blind partition into a compartment for drying clothes and a section for storing sports equipment (for example, skis) and is closed by two doors, one of which has a bolt lock that locks both doors simultaneously. Inside, the clothing section is equipped with a removable meshy shelf for hangers with clothes, holders for shoes and gloves.
There is an air outlet in the cabinet cover. А flange for connection to an external ventilation system is included.
The lower stand of the cabinet is a welded structure made of sheet steel and is the base element on which the cabinet is assembled. There is a built-in heating unit inside the stand body.
The heating unit consists of: cross fan, needle mica heater, temperature control sensor and electronic control unit. Control buttons and light indication of operating modes are located on the front side of the heating unit. As a protection against overheating, a hot-melt fuse is used (without return to the initial point).
Technical characteristics of the Universal-2000
|Overall dimensions (height, width, depth)||2000×650×512*mm|
|Removable meshy shelf||1 pc.|
|Maximum shelf load||10 kg|
|Holder for shoes||1 pc.|
|Holder for gloves||1 pc.|
|Diameter of the flange for air removal to the external hood||120 or 125 mm|
|The length of the power cord||2.5 m|
|Cabinet grounding||through the ground wire and the ground contact in the plug of the power cord.|
|Power capacity of a cross fan||300 m3/h|
|The power of the motor cross fan||53 W|
|Type of heating element||needle mica|
|The power of the heating element||2000 W|
|Mode of operation||
|Timer with fixed automatic shutdown setting||
|Overheating protection||hot melt fuse (no return to initial point)|
|Net weight of Universal-2000||64.5 kg|
* without air outlet flange