Dimensions, HxWxD: 1998 × 625 × 612* mm
Weight: 48,5* kg

Delivery in disassembled state, packaging - 3 places:
• place 1 of 3 (body)
1847х660х130 mm, gross of 23.9 kg;
• place 2 of the 3 (the power unit)
560x220x245 mm, gross 6,8 kg;
• place 3 of 3 (set of removable pipes)
512x425x335 mm, gross 12.3 kg

Drying modules for shoes of Soyuz-10N models are designed for drying wet shoes, pre-wringing is not required.
Drying modules for shoes are a metal body mounted on a modular stand with adjustable supports. Soyuz-10N models can be attached to the wall and in this case are used without a prefabricated stand.

In the drying modules, shoes are placed outside the body, by hanging on removable pipes. For Soyuz-10N models, removable pipes are located on one side of the body.

In the lower part of the body, the shoe drying modules have a built-in heating unit that pumps warm air into the body, which then comes out through holes in the removable pipes. The heating unit consists of one cross fans, respectively, a temperature control sensor and an electronic control unit. Control buttons, digital and light indication of operating modes are located on the side wall of the body. As a protection against overheating, hot-melt fuses are used (without return to the initial point).

A germicidal UV lamp which disinfects the air passing through the shoes is built in the upper part of the body.

For Soyuz-10N models, the outer part of the body and the assembled stand are made of stainless steel, resistant to humid environment, allowing wet cleaning without the use of detergents. Attention! The products are NOT intended for use in aggressive environments.

Technical characteristics of Soyuz-10N models



Overall dimensions (height, width, depth)


Number of removable pipes for hanging shoes

20 pcs.

The maximum load for a removable pipe for hanging shoes

3 kg

The length of the power cord

2.5 m

Cabinet grounding

through the ground wire and the ground contact in the plug of the power cord.

Supply voltage


Number of cross fans

1 pcs.

Power capacity of a cross fan

300 m3/h

The power of the motor cross fan

53 W

The number of needle-shaped mica heaters

1 pcs.

The power of needle-shaped mica heaters

1х2000=2000 W

Type of germicidal lamp

Philips TUV 8W

Power of germicidal lamp

8 W

Mode of operation
  • drying without heating;
  • accurate temperature maintenance 40 0;
  • cooling mode of the heating unit for 1 minute when switched off
Timer with fixed automatic shutdown setting
  • automatic shutdown from 30 minutes to 8 hours, in 30 minutes increments;
  • manual shutdown (no timer)
Overheating protection hot melt fuse (no return to initial point)
Net weight

48,5* kg

* in set with stand