Delivery in disassembled state, packaging - 3 places:
• place 1 of 3 (body)
1847х660х130 mm, gross of 23.9 kg;
• place 2 of the 3 (the power unit)
560x220x245 mm, gross 6,8 kg;
• place 3 of 3 (set of removable pipes)
512x425x335 mm, gross 12.3 kg
Drying modules for shoes of Soyuz-10 models are designed for drying wet shoes, pre-wringing is not required.
Drying modules for shoes are a metal body mounted on a modular stand with adjustable supports. Soyuz-10 models can be attached to the wall and in this case are used without a prefabricated stand.
In the drying modules, shoes are placed outside the body, by hanging on removable pipes. For Soyuz-10 models, removable pipes are located on one side of the body.
In the lower part of the body, the shoe drying modules have a built-in heating unit that pumps warm air into the body, which then comes out through holes in the removable pipes. The heating unit consists of one cross fans, respectively, a temperature control sensor and an electronic control unit. Control buttons, digital and light indication of operating modes are located on the side wall of the body. As a protection against overheating, hot-melt fuses are used (without return to the initial point).
A germicidal UV lamp which disinfects the air passing through the shoes is built in the upper part of the body.
Technical characteristics of Soyuz-10 models
|Overall dimensions (height, width, depth)||
|Number of removable pipes for hanging shoes||
|The maximum load for a removable pipe for hanging shoes||
|The length of the power cord||
through the ground wire and the ground contact in the plug of the power cord.
|Number of cross fans||
|Power capacity of a cross fan||
|The power of the motor cross fan||
|The number of needle-shaped mica heaters||
|The power of needle-shaped mica heaters||
|Type of germicidal lamp||
Philips TUV 8W
|Power of germicidal lamp||
|Mode of operation||
|Timer with fixed automatic shutdown setting||
|Overheating protection||hot melt fuse (no return to initial point)|
* in set with stand